IDEAL 7000 uPVC windows and doors.
A new dimension of energy efficiency.
Aluplast IDEAL 7000 uPVC Doors
IDEAL 7000 uPVC system profile series opens new possibilities in the field of entrance door fabrication.
The IDEAL 7000 entrance doors are characterized by a very good thermal insulation parameters and are compatible with IDEAL 7000 and IDEAL 8000 profile series. Thanks to the multi-chamber construction and profile depth of 85 mm as well as the use of a door threshold with thermal insulation spacer, the thermal parameters of the door have been significantly improved, with the Uf value reaching 1.2 W/m2 K.
In these new profiles it is possible to use glazing units and fillings up to 50 mm wide.
The low threshold featuring height of 20 mm meets the requirements for construction without architectural barriers and allows easy entry and exit.
IDEAL 7000 entrance doors its special shape allow you to connect with additional system profiles, such as extensions. Wide aluminum drip cap effectively drains water to the outside.
System is available in white, brown and anthracite core.
Aluplast IDEAL 7000 uPVC Standard Window
IDEAL 7000 uPVC system is an example of the synergistic use of the properties of profiles and composite double glazing to create windows characterized by very low thermal transmittance. The thermal permeability coefficient of profiles obtained with Uf = 1.1-1.0 W/m2K combined with the possibility of using wider and warmer glass packages of up to 51 mm wide guarantees the best thermal parameters of the window.
It is a system with an external seal, which gives the opportunity to offer an energy-saving solution also for glazed structures, without the need for adapters. A large chamber with solid steel reinforcement guarantees stability of the frame. The system allows free connection of frames with other series of profiles with a depth of 85 mm.
Ideal 7000 series is a multifunctional system, using MULTIFALZ technology, i.e. an optional possibility of applying bonded glued glass technology. Thanks to the new geometry of the glazing notch, not only conventional glazing is possible but also gluing in the windows. These technologies can be used alternately or combined depending on the needs. For example, it is possible to improve the thermal properties of the structure by eliminating steel reinforcements and gluing windows, or applying larger windows, colors, etc., both by reinforcement with steel reinforcements and glass bonding technology.
The optional use of window glass insertion technology allows for even more stable windows. Thanks to the permanent bonding of the pane and the wing, the risk of bending, twisting and sagging of the wing is reduced, thus extending the life of the wings without the need to adjust them.
Aluplast IDEAL 7000 uPVC Window „Powerdur Inside”
“Powerdur inside” is an innovative co-extrusion technology of pvc profiles with the use of special thermoplastic inserts reinforced with ultradur® high speed fiberglass, developed in cooperation with BASF.
IDEAL 7000 “powerdur” is a perfect example of a “hybrid” solution in which, on the one hand, we increase the depth of profiles up to 85 mm, increase the number of chambers, enable glazing of energy-saving 51 mm wide glass packs, and on the other hand we eliminate steel reinforcements, which negatively affect the thermal properties of construction. The glass fiber reinforced thermoplast replaces steel used in conventional PVC window frames and provides much better thermal insulation properties maintaining the same mechanical properties of the window.
By eliminating steel reinforcements within the profiles of the IDEAL 7000 series “powerdur inside”, thermal bridges are limited, and the heat transfer coefficient of frames for this series is Uf=1,0W/m2K, which is a very good result for a system with external sealing. At the same time, the construction of the profiles gives the possibility of further improvement of thermal permeability of profiles, by optionally filling the space of some internal chambers with thermo-insulating material.